買印表機前的準備：更新驅動程式、領三倍券、到燦坤測試

現金與三倍券

帶回家 (2020728)

======================================================

套件庫可以安裝到的 開放原始碼版本， hplip 3.20.3 (就是 2020-03 的版本)

 目前市面上看到的機種都有支援，不過還是要再次確認

Release Notes  HPLIP 3.20.6 - This release has the following changes:
把候選名單的印表機型號輸入，注意有無空格都要嘗試如  Ink Tank, InkTank

=============這是舊筆電的筆記，後續使用新筆電就簡單多了

 遇到到燦坤，
若工作人員同意，我會先測試
1. 插入 USB 連接線，看系統是否自動抓到 (將不測試列印，除非人員同意)
2.  取得人員同意，進行掃描功能測試，啟動 xsane

Install HP Linux Imaging and Printing (HPLIP) 3.17.10 in Ubuntu / LinuxMint
我的天！ 這個版本這麼麼舊，


這網頁也是，sourcefore 夠專業吧！也是說明 2017-10-17
https://sourceforge.net/projects/hplip/files/hplip/3.17.10/

到 HP 官網下載 Linux 驅動程式
https://developers.hp.com/hp-linux-imaging-and-printing/gethplip

按下 download HPLIP 卻連線到 sourceforge，HP 果然走真開源路線，不像 nvidia (上週買新筆電，因為 nvidia GTX 1650 無法搞定，對這私有驅動程式感冒)

nice@nice-Dell-15:~/下載$ ./hplip-3.20.6.run
bash: ./hplip-3.20.6.run: 拒絕不符權限的操作
nice@nice-Dell-15:~/下載$ sudo ./hplip-3.20.6.run

Creating directory hplip-3.20.6
Verifying archive integrity... All good.
Uncompressing HPLIP 3.20.6 Self Extracting Archive.......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

HP Linux Imaging and Printing System (ver. 3.20.6)
HPLIP Installer ver. 5.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Installer log saved in: hplip-install_Sun-19-Jul-2020_10:54:59.log

\
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.


INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.

Please choose the installation mode (a=automatic*, c=custom, q=quit) :


Please choose the installation mode (a=automatic*, c=custom, q=quit) : a


INTRODUCTION
------------
This installer will install HPLIP version 3.20.6 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).


DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Linux Mint 19.3.

Is "Linux Mint 19.3" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y

Initializing. Please wait...


ENTER USER PASSWORD
-------------------
Please enter the sudoer (nice)'s password:


ENTER USER PASSWORD
-------------------
Please enter the sudoer (nice)'s password:


INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.

Please read the installation notes. Press <enter> to continue or 'q' to quit:


DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
HPLIP-3.17.10 exists, this may conflict with the new one being installed.
Do you want to ('i'= Remove and Install*, 'q'= Quit)?    :i



HPLIP-3.17.10 exists, this may conflict with the new one being installed.
Do you want to ('i'= Remove and Install*, 'q'= Quit)?    :i
Starting uninstallation...
HPLIP uninstallation is completed


RUNNING POST-PACKAGE COMMANDS
-----------------------------
OK


RE-CHECKING DEPENDENCIES
------------------------
OK


RUNNING SCANJET DEPENDENCY COMMANDS
-----------------------------------
sudo apt-get install --assume-yes python-pip (Scanjet-depend step 1)
sudo pip install --upgrade pip (Scanjet-depend step 2)
sudo -H pip install setuptools (Scanjet-depend step 3)
sudo pip install --upgrade setuptools (Scanjet-depend step 4)
sudo apt-get install --assume-yes libleptonica-dev (Scanjet-depend step 5)
sudo apt-get install --assume-yes tesseract-ocr (Scanjet-depend step 6)
sudo apt-get install --assume-yes libtesseract-dev (Scanjet-depend step 7)
sudo -H pip install tesserocr (Scanjet-depend step 8)
sudo apt-get install --assume-yes tesseract-ocr-eng (Scanjet-depend step 9)
sudo apt-get install --assume-yes libzbar-dev (Scanjet-depend step 10)
sudo apt-get install --assume-yes python-zbar (Scanjet-depend step 11)
sudo apt-get install --assume-yes python-opencv (Scanjet-depend step 12)
sudo apt-get install --assume-yes python-pypdf2 (Scanjet-depend step 13)
sudo -H pip install imutils (Scanjet-depend step 14)
sudo apt-get install --assume-yes imagemagick* (Scanjet-depend step 15)
sudo apt-get install --assume-yes graphicsmagick*  (Scanjet-depend step 16)
sudo -H pip install pypdfocr (Scanjet-depend step 17)
sudo -H pip install scikit-image (Scanjet-depend step 18)
sudo -H pip install scipy (Scanjet-depend step 19)
OK


PRE-BUILD COMMANDS
------------------
OK


BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/ppd/HP --libdir=/usr/lib/x86_64-linux-gnu --prefix=/usr --enable-qt4 --disable-qt5 --enable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-libusb01_build --disable-foomatic-ppd-install --disable-hpijs-install --disable-class-driver --disable-udev_sysfs_rules --disable-policykit --enable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build --enable-apparmor_build'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make'
Please wait, this may take several minutes...
Command completed successfully.

Running 'sudo make install'
Please wait, this may take several minutes...
Command completed successfully.


Build complete.



POST-BUILD COMMANDS
-------------------


CLOSE HP_SYSTRAY
----------------
Sending close message to hp-systray (if it is currently running)...
OK


HPLIP UPDATE NOTIFICATION
-------------------------
Do you want to check for HPLIP updates?. (y=yes*, n=no) :